Standard perforation grid for railing

DMD10102 SARTHE - Square hole perforated plate

€128.40
VAT included

Perforated plates SARTHE in steel 2 mm thickness

Different standard size and format are applied to this perforated sheets according table below.
Variable delay of 4 to 10 weeks in accordance with terms of production.

Metallic perforated sheet delivered flat and unfold
Plain peripheral edge or non-perforated frame from 10 to 20 mm apparent to the perforation sequence.

Back face deburring to remove sharp edges.
Industrial tolerance of +/- 2 mm on dimension measurements.  

For more than 50 m², a better price can be offered.
Industrial quality painting can be processed on an ordre of minimum 30 m².
Flat fee of 145 € HT for  a changement to a non standard size.
Metal sheet SARTHE - DAMPERE METAL cut on demand if you ask for it, send us an request per mail.

Dimensions
Colour
  • RAW METAL

Volume discounts

Quantity Discount You Save
2 3% Up to €8.28
Quantity

Design Perforated plate - Mixed square holes

Decoration shaped for design effects.

Impact on the scene with aleatoric distribution of perforated holes to improve the graphics.

Masking with transparency

Smart positionned holes allow the light to pass through but hold look away

Standard sizes - Reference - Weight  

Item DMD10101 -  SARTHE on size 650 X 800 mm for 0,5 m² and 6,3 kg each
Item DMD10102 -  SARTHE on size 800 X 1200 mm for 1 m² and 12,6 kg each
Item DMD10103 -  SARTHE on size 1000 X 1500 mm for 1,5 m² and 18,9 kg each
Item DMD10104 -  SARTHE on size 2000 X 1000 mm for 2 m² and 25,2 kg each
Item DMD10105 -  SARTHE on size 650 X 1000 mm for 0,65 m² and 8,2 kg each
Item DMD10106 -  SARTHE on size 450 X 650  mm for 0,3 m² and 3,8 kg each
Item DMD10107 -  SARTHE on size 300 X 450  mm for 0,15 m² and 1,9 kg each 

Item from DAMPERE METAL brand.

Norms et tolerancies 

Our products meet AFNOR NFE 81070-060-061 standards.
Metal sheets are manufactured by mecanical tools, stripes and scratch could appear on the surface, only powder coating can mask.
Dimension tolerancies of +/- 2 mm on all measurement.

Delivery conditions

Pieces are delivered as raw material for further processing, not degreased to avoid accelerated corrosion, must be defatted before any use. A slight fat balm will protect metal skin from ambiant air.

Metal pieces delivered in a cardboard packaging reduce the transport cost. Sometimes, angles could be slightly bent, it would be appropriate to rectify it before use.

For any order heavier than 50 kg, the packaging involves a wooden pallet to enable handeling by palett truck.

To discover more opportunity with our products, you will find more information on DAMPERE.

PERFO SARTHE - DAMPERE METAL